Download Griggs Paint Specification Software
GRIGGSPEC is a computer aided
coatings selection program designed to recommend possible paints & coatings for a specific project.
This interactive software will present questions and based on your answers, will suggest different coating
systems for your painting project. This program is a guide only and the final recommendation should be confirmed with a salesperson. You may download this self-extracting file, create a directory called
"griggs", copy the file into that directory and run the GSPEC.EXE to automatically extract all the necessary
files. To begin the program, type "griggs" at the griggs directory. If you have any questions concerning
this software you may leave e-mail or call Bob Commisso at 888-947-4447. Click here
GSPEC.EXE to download the software now!
Elastomeric Roof Coating 300W37
PRODUCT: A water-base, elastomeric roof coating with superior durability, flexibility and weather resistance.
DESCRIPTION: An elastomeric roof coating formulated with a blend of elastomeric acrylic resins to provide excellent exterior durability. This coating can be used as a system for roofs along with fiberglass membranes and cloth. It has excellent flexibility for expansion and contraction resistance. Can be used over hairline cracks.
PROPERTIES:
- COLOR.....................................White*
- SOLIDS(Weight)............................69 - 71%
- SOLIDS(Volume)............................42- 54%
- THEORETICAL COVERAGE......................75 sq.ft/gal
- ELONGATION................................240%+
- *Custom tints available upon request.
- DRYING TIME-AT 75 DEGREES F:
- TO TOUCH..................................4 Hours
- TO RECOAT.................................Overnight
- VEHICLE TYPE..............................Elastomeric/Acrylic
- WEIGHT/GAL................................12.6 to 12.9 lbs/gal
ADVANTAGES:
Low Volatile Organic Compound Content
Excellent Exterior Durability
Excellent Flexibility
Extremely Weather Resistant
Water Reducible
USES:
Asphalt
Aluminum
Concrete
Polyurethane Roofs
Wood Roofs
Galvanized Steel
APPLICATION & REDUCTION: Elastomeric Coating, 300W37, is ready for use at packaged consistency. For brushing and rolling, use at packaged consistency. For spraying, thin only as needed for proper atomization. Thinning is not normally recommended.
SURFACE PREPARATION:
Surface must be clean, dry and free of all contamination before application. Cracks and imperfections must be patched, mildew removed and loose or peeling paint removed by sanding or scraping.
STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
 Top of Page
Elastowall Coating 300W67
PRODUCT: A water-base, elastomeric acrylic coating which
provides excellent flexibility and exterior weather resistance.
DESCRIPTION: An elastomeric coating formulated with a blend
of elastomeric acrylic resins to provide excellent exterior durability. This coating can be used as a system for waterproof protection against wind driven rain. It has excellent flexibility for expansion and contraction resistance. Can be used over hairline cracks.For above ground use only.
PROPERTIES:
- COLOR..............................Full Spectrum
- SOLIDS(Weight).....................59 - 62%
- SOLIDS(Volume).....................44 - 48%
- THEORETICAL COVERAGE...............200 sq.ft/gal
- DRY FILM THICKNESS.................5.0 mils
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE..........................4 Hours
- TO RECOAT..........................24 Hours
- VEHICLE TYPE.......................Elastomeric/Acrylic
- WEIGHT/GAL.........................10.6 to 11.5 lbs/gal
ADVANTAGES:
Low Volatile Organic Compound Content
Excellent Exterior Durability
Excellent Flexibility
Extremely Weather Resistant
Water Reducible
Protects Against Wind Driven Rain
Waterproof System
USES:
Stucco
Brick
Concrete
Masonry
Primed Wood
Primed Steel
APPLICATION & REDUCTION: Elastowall Coating can be applied by brush, rollor spray. For brushing and rolling, use at packaged consistency. For spraying, thin only as needed for proper atomization of paint. Thinning is not normally recommended.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. Cracks and imperfections must be patched, mildew removed, loose or peeling paint removed by sanding or scraping.
STEEL: Surface must be clean and free of all oil, grease and
foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation.Avoid contact with skin and eyes. Read material safety data sheet before using.
Top of Page
Acrylic Latex Flat 303 Series
PRODUCT: An exterior grade vinyl acrylic flat paint.
DESCRIPTION: A vinyl acrylic flat coating that will provide excellent durability and weather resistance. Griggs vinyl acrylic flat paint is formulated with a high grade vinyl acrylic resin and exterior grade raw materials. This product produces a film that has excellent adhesion,
chalk and fade resistance.
PROPERTIES:
- COLOR..............................Full Range
- SOLIDS(Weight).....................58 - 63%
- SOLIDS(Volume).....................39 - 44%
- THEORETICAL COVERAGE...............575 sq.ft./gal*
- DRYING TIME-AT 75 DEGREES F:
- TO TOUCH...........................Within 15 Minutes
- TO RECOAT..........................2 - 4 Hours
- VEHICLE TYPE.......................Vinyl Acrylic
- GLOSS..............................4-8 @ 60 Degrees
- * Coverage @ 1 Mil Dry Film.
ADVANTAGES:
- Early Water Resistance.
- Resistant to Mildew.
- Water-Base.
- Abrasion Resistant.
- Superior Exterior Durability.
USES:
- Exterior Walls.
- Exterior Stucco & Masonry.
- Exterior Metal Surfaces.
- Exterior Block.
- Exterior Wood Surfaces.
APPLICATION & REDUCTION: Griggs Vinyl Acrylic Latex Flat may be thinned with water if necessary. Use at packaged consistency for most
applications. May be applied by brush, roll or spray.
SURFACE PREPARATION: Surface must be clean and free of
grease, oil, chalk, dust, and other contaminants. Loose or peeling paint must be removed by sanding, scraping, waterblast or sandblasting. All mildew must be removed before application. Remove by scrubbing with a solution made
of 1 quart household bleach in 3 quarts of water. DO NOT ADD DETERGENTS OR AMMONIA TO THE BLEACH/WATER MIXTURE. Scrub to remove any contaminants. Careful surface preparation is the key to a long lasting and successful job.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation.
Avoid contact with skin and eyes.
Read material safety data sheet before using.
Top of Page
100% Acrylic Latex Flat
PRODUCT: A 100% acrylic flat water thinned coatings.
DESCRIPTION: A 100% acrylic flat coating that will provide
excellent durability and weather resistance. Griggs 100% acrylic flat paint is formulated with a high grade acrylic resin and exterior grade raw materials. This product produces a film that has excellent adhesion, chalk and fade resistance. It meets Federal Specification TT-P-19D.
PROPERTIES:>
- COLOR...........................Full Range
- SOLIDS(Weight)..................64 - 66%
- THEORETICAL COVERAGE............350 - 400 sq.ft/gal
- DRY FILM THICKNESS..............1.5 mils @ 350 sq.ft./gal
- DRYING TIME-AT 75 DEGREES F:
- TO TOUCH........................30 Minutes
- TO RECOAT.......................5 - 6 Hours
- VEHICLE TYPE....................100% Acrylic
- GLOSS...........................5-10 @ 60 Degrees
ADVANTAGES:
- Early Water Resistance.
- Resistant to wind driven rain.
- Water-Base.
- Water Stain Resistant.
- Superior Exterior Durability.
USES:
Exterior Surfaces Exposed to Sun or Wind Driven Rain.
Carports Ceilings.
Exterior Block or Stucco Walls.
Exterior Wood Surfaces.
Exterior Metal Surfaces.
APPLICATION & REDUCTION: Griggs 100% Acrylic Latex Flat may be thinned with water if necessary. Use at packaged consistency for most applications.
SURFACE PREPARATION: Surface must be clean and free of grease, oil, chalk, dust, and other contaminants. Loose or peeling paint must be removed by sanding, scraping, waterblast or sandblasting. All mildew must be removed before application. Remove by scrubbing with a solution made of 1 quart household bleach in 3 quarts of water. DO NOT ADD DETERGENTS OR AMMONIA TO THE BLEACH/WATER MIXTURE. Scrub to remove any contaminants. Careful surface preparation is the key to a long lasting and successful job.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation.
Avoid contact with skin and eyes.
Read material safety data sheet before using.
Top of Page
100% Acrylic Latex Semigloss 300 Series
PRODUCT: A water-base, 100% acrylic latex semigloss paint for exterior surfaces. Excellent for wood, masonry, stucco and properly prepared and primed metal.
DESCRIPTION: An exterior 100% acrylic latex semigloss paint
with outstanding exterior durability. This coating can be applied to metal, masonry and wood surfaces. It is ideal for use on primed metal, surfaces that have been previously painted and properly prepared, and for use on clean concrete and wood. This acrylic coating is extremely versatile due to its rich
formulation.
PROPERTIES:
- COLOR..............................Full Spectrum
- SOLIDS(Volume).....................39 - 45%
- THEORETICAL COVERAGE...............640 mil sq.ft/gal
- DRY FILM THICKNESS.................1.5 to 2.0 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE..........................30 Minutes.
- TO RECOAT..........................2 Hours
- VEHICLE TYPE.......................Acrylic Latex
- WEIGHT/GAL.........................10.2 to 11.5 lbs/gal
ADVANTAGES:
- Low Volatile Organic Compound Content.
- Excellent Exterior Durability.
- Excellent Foundation.
- Extremely Abrasion Resistant.
- Water Reducible.
- Water Clean-Up.
- High Solids.
USES:
- Wood.
- Metal.
- Concrete.
- Masonry.
APPLICATION & REDUCTION: 100% Acrylic Latex Coating can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Water. For spraying, thin up to 15% or as needed with Water.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer.
STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation. Avoid contact with skin and eyes. Read material safety data sheet before using.
Top of Page
Acrylic Latex Stain 301 Series
PRODUCT: A water-base, acrylic latex stain for exterior and interior surfaces. This product is available in a flat, fully opaque finish.
DESCRIPTION: An interior-exterior acrylic latex stain with outstanding exterior durability. This coating can be applied to metal, masonry and wood surfaces. It is ideal for use on primed metal, surfaces that have been previously painted and properly prepared, and for use on clean concrete and wood. This acrylic coating is extremely versatile due to its rich
formulation.
PROPERTIES:
- COLORS............................Full Spectrum
- SOLIDS(Weight)....................58 - 65%
- THEORETICAL COVERAGE..............250-350 sq.ft/gal
- DRY FILM THICKNESS................1.5 to 2.0 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE.........................30 Minutes.
- TO RECOAT.........................2 Hours
- VEHICLE TYPE......................Acrylic Latex
- WEIGHT/GAL........................10.6 to 11.5 lbs/gal
ADVANTAGES:
Low Volatile Organic Compound Content.
Excellent Exterior Durability.
Excellent Foundation.
Extremely Abrasion Resistant.
Water Reducible.
Water Clean-Up.
High Solids.
USES:
Wood.
Metal.
Concrete.
Masonry.
Interior and Exterior.
APPLICATION & REDUCTION: Griggs Acrylic Latex Stain can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Water. For spraying, thin up to 15% or as needed with Water.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer.
STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation. Avoid contact with skin and eyes. Read material safety data sheet before using.
Top of Page
Latex Semigloss Enamel 302 Series
PRODUCT: A vinyl acrylic latex semigloss enamel with
quick dry and good adhesion.
DESCRIPTION: A vinyl acrylic latex semigloss enamel
formulated to provide a uniform finish that dries quickly and adheres tightly. It forms a tough and durable film that is resistant to scuffing and abrasion. It is ideal for use in homes, apartments, schools, hospitals, offices and warehouses. Rinses easily from hands and tools with soap and water.
PROPERTIES:
- COLOR..............................Full Range
- SOLIDS(Weight).....................56 - 60%
- SOLIDS(Volume).....................38 - 41%
- THEORETICAL COVERAGE...............400 sq.ft/gal
- DRY FILM THICKNESS.................1.5 mils @ 350 sq.ft./gal
- DRYING TIME-AT 75 DEGREES F:
- TO TOUCH...........................1 - 2 Hours
- TO RECOAT..........................Overnight
- VEHICLE TYPE.......................Vinyl Acrylic
- GLOSS..............................50-70 @ 60 Degrees
ADVANTAGES:
Tough and Durable.
Quick Drying.
Water-Base.
Cleans Easily.
High Hiding.
USES:
Interior/Exterior.
Repaint
Wallboard
Masonry
Metal
APPLICATION & REDUCTION: Griggs Latex Semigloss Enamel can be applied by brush, roll or spray. Use at packaged consistency for brush and roll applications. Thin with up to 1 pint of water per gallon of paint for airless spray application.
SURFACE PREPARATION: Surface must be clean and free of grease, oil, chalk, dust, and other contaminants. Loose or peeling paint must be
removed by sanding, scraping, waterblast or sandblasting. All mildew must be removed before application. Remove by scrubbing with a solution made of 1 quart household bleach in 3 quarts of water. DO NOT ADD DETERGENTS OR AMMONIA TO THE BLEACH/WATER MIXTURE. Scrub to remove any contaminants. Careful surface preparation is the key to a long lasting and successful job.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation. Avoid contact with skin and eyes. Read material safety data sheet before using.
Top of Page
Semigloss Alkyd Enamel
PRODUCT: A high quality semigloss alkyd enamel for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics.
DESCRIPTION: A specially formulated semigloss alkyd enamel for wood, metal and masonry surfaces. Griggs Semigloss Alkyd Enamels are durable, washable, easy to apply and have excellent hide and scrub properties.
PROPERTIES:
- COLORS.........................Full Spectrum(All Colors).
- SOLIDS(Weight)*................60 - 63%
- SOLIDS(Volume)*................54 - 57%
- THEORETICAL COVERAGE*..........350 - 450 sq.ft/gal
- DRY FILM THICKNESS.............2.0 to 3.5 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE......................6 To 8 Hours
- TO RECOAT......................12 To 24 Hours
- VEHICLE TYPE...................Modified Alkyd
- WEIGHT/GAL*....................9.9 - 11.2 lbs/gal
- *Values may vary with color.
ADVANTAGES:
Meets TT-E-508C.
Excellent Opacity & Hide.
Extremely Durable.
Excellent Flow & Leveling.
Easy Application.
Extremely Washable.
USES:
Wood.
Metal.
Cabinets.
Masonry.
Furniture.
APPLICATION & REDUCTION: Griggs Semigloss Alkyd Enamels are formulated for brush, roll or spray application. For spraying, thin up to 15% or as needed with Synthetic Reducer. For brushing, use at packaged consistency or thin as needed with Mineral Spirits.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of semigloss alkyd enamel.
PRECAUTIONS: Keep out of reach of children. Use with adequate ventilation. Avoid contact with skin and eyes. Read material safety data sheet before using this product.
Top of Page
|