Download Griggs Paint Specification Software
GRIGGSPEC is a computer aided coatings selection program designed to recommend possible paints & coatings for a specific project. This interactive software will present questions and based on your answers, will suggest different coating systems for
your painting project. This program is a guide only and the final recommendation should be confirmed
with a salesperson. You may download this self-extracting file, create a directory called "griggs",
copy the file into that directory and run the GSPEC.EXE to automatically extract all the necessary
files. To begin the program, type "griggs" at the griggs directory. If you have any questions concerning
this software you may leave e-mail or call Bob Commisso at 888-947-4447. Click here
GSPEC.EXE to download the software now!
Fast Dry Water Reducible Primer 200A77
PRODUCT: A modified waterborne acrylic primer designed for priming metal surfaces including aluminum, steel, and galvanized steel.
DESCRIPTION: A specially formulated modified acrylic water base primer designed to be used as a primer on various surfaces. This acrylic primer may be applied to aluminum, steel & galvanized iron, & other surfaces. This product has been formulated to give an excellent foundation for finish coats.
PROPERTIES:
- COLOR..............................Grey or Custom upon request.
- SOLIDS(Weight).....................50 - 60%
- THEORETICAL COVERAGE...............250 - 400 sq.ft/gal
- DRY FILM THICKNESS..1.5 mils @ 350 sq.ft./gal
- DRYING TIME-AT 75 DEGREES F:
- TO TOUCH...........................30 Minutes
- TO SAND ..........................2 Hours
- VEHICLE TYPE.......................Modified Acrylic
- GLOSS..............................5-15 @ 60 Degrees
ADVANTAGES:
- Early Water Resistance.
- Excellent adhesion to most metals.
- Fast Air dry.
- Difficult to clean with water in 15 min.
- 200 hrs Salt Spray with minimum creepage and rusting.
- 200 hrs water soak with min blistering.
- Excellent sanding after 2 hours
USES:
As Primer or Surfacer on metal to receive topcoats
APPLICATION & REDUCTION: Griggs Fast Dry Primer, 200A77 may be thinned with water if necessary. Use at packaged consistency for most applications.
SURFACE PREPARATION: Surface must be clean and free of grease, oil, chalk, dust, and other contaminants.
GALVANIZED IRON: Allow exterior galvanized to weather for six months before painting. Remove grease, grime, dirt, wax and salts by chemical stripper or solvent cleaning. Galvanizing may be treated with chromates, silicates, etc. and may require weathering or brush blasting before painting. If immediate painting is required or surface is protected from weather clean as recommended. Rust must be removed by hand or power tool cleaning per SSPC-SP 3-63. Some forms of water and detergent blast or acid wash may provide an adequate clean surface. A test patch on several areas should be applied and evaluated for adhesion.
PRECAUTIONS: KEEP OUT OF THE REACH OF CHILDREN.
Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.
 Top of Page
DC740 Ratmoore Scorpio Red Primer 200R58
PRODUCT: A water-base, high-solids primer for ferrous metal. DC740 Ratmoore Primers are single-component, modified alkyd coatings formulated for maximum rust prevention.
DESCRIPTION: A highly rust-resistant primer for ferrous metal. DC740 primers are lead-free and have an extremely high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. May be applied over firm old alkyd or oilbase coatings as a barrier coat. This coating is extremely versatile due to its rich formulation.
PROPERTIES:
- COLOR............................Red Oxide
- SOLIDS(Volume)...................35%
- THEORETICAL COVERAGE.............565 mil sq.ft/gal
- DRY FILM THICKNESS...............2.0 to 2.5 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE........................30 Minutes.
- TO RECOAT........................2 Hours
- VEHICLE TYPE.....................Modified Alkyd
- WEIGHT/GAL.......................11.2 lbs/gal
- SALT SPRAY.......................300+ Hours ASTM STD. B117
- TEMPERATURE RESISTANCE...........Up to 250 degrees F
ADVANTAGES:
- Low Volatile Organic Compound Content
- Excellent Corrosion Resistance
- Excellent Foundation
- Extremely Abrasion Resistant
- Water Reducible
- Water Clean-Up
- Low V.O.C.
USES:
- Steel
- Machinery
- Tanks
- Bridges
- Equipment
APPLICATION & REDUCTION: DC740 Ratmoore Primers can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Water. For spraying, thin up to 15% or as needed with Water.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer.
STEEL:
Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product. Keep From Freezing.
Top of Page
Acrylic Urethane Enamel 310 Series
PRODUCT: An air-dry, waterbase, urethane acrylic coating for industrial applications.
DESCRIPTION: A high grade water reducible acrylic type
copolymer gloss and medium gloss enamels intended for use on primed metal but
particularly on smooth exterior metal. It is highly weather-resistant and has superior color
and gloss retention.
PROPERTIES:
- COLORS........................Full Spectrum(All Colors)
- SOLIDS(Volume)................67%
- THEORETICAL COVERAGE..........350 sq.ft/gal
- DRY FILM THICKNESS............1.5 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- SET-TO-TOUCH..................1 HOUR MAX
- DRY HARD......................8 HOURS MAX
- VEHICLE TYPE..................URETHANE/ACRYLIC
ADVANTAGES:
- Excellent Weather Resistance.
- Quick-Dry.
- Excellent Coverage.
- Superior Gloss Retention.
USES:
- Steel
- Machinery
- Tanks
- Railings
- Equipment
- Towers
APPLICATION & REDUCTION: Griggs Acrylic Urethane enamels may be applied by airless or conventional spray application. For conventional spraying,
thin up to 15% or as needed with tap water. Use as is or with minimum thinning for airless application. May be brushed for small areas only.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer.
STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.
Top of Page
DC740 Water Reducible Alkyd Modified Enamel
PRODUCT: A water-base, rust-resistant topcoat for ferrous metal. DC740 Water-Reducible Enamels are single-component, modified alkyd coatings formulated for maximum rust prevention.
DESCRIPTION: A high gloss, rust-resistant, industrial grade water reducible enamel for steel. These enamels have an extremely low VOC content. DC740 Water-Reducible Enamels have excellent exterior durability and dry to a hard glossy finish.
PROPERTIES:
- COLORS.............................Full Range
- SOLIDS(Weight).....................45 - 48%*
- SOLIDS(Volume).....................29 - 32%*
- THEORETICAL COVERAGE...............565 mil sq.ft/gal
- DRY FILM THICKNESS.................2.0 to 2.5 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE..........................10 - 20 Minutes
- TO RECOAT..........................30 - 35 Minutes
- VEHICLE TYPE.......................Modified Alkyd
- WEIGHT/GAL.........................10.1 lbs/gal*
- TEMPERATURE RESISTANCE.............Up to 250 degrees F
*Values may vary with color.
ADVANTAGES:
- Low Volatile Organic Compound Content
- Excellent Exterior Durability
- Hard Glossy Finish
- Abrasion Resistant
- Water Reducible
- Water Clean-Up
- Industrial Finish
USES:
- Steel
- Machinery
- Parts
- Tools
- Equipment
APPLICATION & REDUCTION: DC740 Water-Reducible Enamels can be reduced with water up to 35% by volume for spraying applications. For high build applications, however, they can be used as packaged. Thin as needed with water for smooth flow and leveling of the paint film.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of enamel topcoat.
STEEL: Surface must be clean and free of all oil, grease and
foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: KEEP OUT OF THE REACH OF CHILDREN.
Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.
Top of Page
Hydro-Acrylic Stain 300-65
PRODUCT: A waterbase methacrylic monomer penetrating stain designed to give excellent water repellency and penetration. All colors are semi-opaque.
DESCRIPTION: Griggs Hydro-Acrylic methacrylic monomer is a water-repellent, semi-opaque penetrating coating that will provide years of protection and beauty to any concrete surface or structure. Due to its superior penetrating properties, it exhibits excellent adhesion to properly prepared substrates. This coating also provides excellent weather and UV resistance.
PROPERTIES:
- COLORS..............................Full Range
- FINISH..............................Low Sheen to Flat
- PIGMENT.............................Inorganic Oxides
- VEHICLE.............................Methacrylic Monomer Resin
- WEIGHT/GAL..........................8.7 - 9.7 lbs.
- SOLVENT.............................Water
- VISCOSITY...........................150-500 CPS
- SOLIDS(Volume)......................21% min.
- Coverage at 2 mils.(20% loss).......150 sq. ft. gal
RESISTANCE TO:
OILS................................Excellent
GREASE..............................Excellent
WATER...............................Excellent
WEATHER.............................Excellent
ADVANTAGES:
- Highly Durable
- Water Repellent
- Oil Resistant
- Penetrating
- Low V.O.C. Content
- Ultraviolet Resistant
USES:
- Concrete Structures
- Driveways
- Garages
- Carports
- Walkways
APPLICATION & REDUCTION: Griggs Hydro-Acrylic methacrylic monomer stain can be brushed, rolled or sprayed. This product is normally ready for application as supplied. If thinning is necessary, use clean tap water. Do not apply when ambient or surface temperatures are below 50 degrees Fahrenheit.
PRECAUTIONS: Use with adequate ventilation. Avoid contact with skin and eyes. KEEP OUT OF THE REACH OF CHILDREN! Do not take internally. Avoid breathing vapor or mist. Read Material Safety Data Sheet before using this product.
Top of Page
Hydropox #2 4:1 Waterbase Epoxy
DESCRIPTION: A two component water base epoxy amine coating
that provides excellent adhesion, solvent resistance and abrasion resistance with water clean up. Hydropox #2 provides a film that is comparable with many solvent base systems. It exhibits excellent adhesion to many substrates such as aluminum, cold rolled steel, glass, concrete, masonry, plastics, tile, aged alkyd and epoxy films. Hydropox #2 exhibits less odor than acrylic latex paint and can be applied electrostatically. Hydropox #2 can also be used as an Anti-Graffiti coating. Since it is highly resistant to many solvents after cured, the ordinary paints, such as aerosol paints, can be wiped off without damaging the existing gloss, color or film, even if rubbed. Hydropox #2 is designed for the professional user. It is a true epoxy system and will exhibit properties of solvent based systems. Always mix at a ratio of 4:1 by volume.
PROPERTIES:
COLORS.................................Full Range
FINISH.................................High Gloss
VEHICLE................................Epoxy Amine
SOLIDS BY VOLUME(Mixed)................57 - 59%
SOLIDS BY WEIGHT(Mixed)................66 - 68%
POT LIFE(@70 Degrees F)................*4 - 6 Hrs
DRY-TO-TOUCH...........................*1-3 Hours
DRY HARD...............................*24 Hours
FULL CURE..............................*96 Hours
COVERAGE...............................300 - 400 sq.ft/gal
*(All pot life and dry times will be affected by temperatures.)
TYPICAL USES:
- Steel
- Floors
- Garages
- Wood
- Clean Rooms
CHARACTERISTICS:
- Water Clean-up
- Excellent Adhesion
- Low V.O.C. Content
- Chemical Resistant
APPLICATION & REDUCTION: Hydropox #2 4:1 can be applied by brush, roller or spray. Thin with tap water as required for application and operator preference.
MIXING INSTRUCTIONS: Premix both parts thoroughly before combining. Add 4 parts Component B to 1 part Component A by volume. Thoroughly mix then add tap water as required. Normally, due to this coating's high solids content, 1/2 gallon to 3/4 gallon of water is required to thin paint to a satisfactory rolling, spraying or brushing consistency. If paint does not flow smoothly when applying, add more water until a smooth flow is accomplished. If a retarder solvent is required, add butyl cellosolve or acetone as needed, not exceeding 6 ounces per kit.
SURFACE PREPARATION: Surface to be coated must be clean,structurally sound and free of all foreign contaminants including dirt, wax, loose paint or curing compounds. Surface may be damp, but standing water must be removed. Concrete should be sandblasted, vacuum blasted or acid etched. If an acid etch is performed, surface must be rinsed and neutralized with a solution of ammonia and water. Mix 1 pint household ammonia to 5 gallons water and scrub surface immediately after water rinse. If recoating an epoxy surface is desired, and coating has cured more than 24 hours at 77 degrees F or cannot be indented with a fingernail, a light sanding with 60-80 grit sandpaper is required for proper adhesion of the new coat.
PRECAUTIONS: KEEP OUT OF REACH OF CHILDREN. USE WITH ADEQUATE VENTILATION. AVOID CONTACT WITH SKIN AND EYES. READ MATERIAL SAFETY DATA SHEET BEFORE USING.
Top of Page
DC740 Ratmoore Primers 740 Series
PRODUCT: A water-base, rust-resistant primer for ferrous metal. DC740 Ratmoore Primers are single-component, modified alkyd coatings formulated for maximum rust prevention.
DESCRIPTION: A highly rust-resistant primer for ferrous metal. DC740 Ratmoore primers are lead-free and have an extremely low VOC content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. May be applied over firm old alkyd or oilbase coatings as a barrier coat. This coating is extremely versatile due to its rich formulation. Available in gray and red, both colors are water-reducible.
PROPERTIES:
COLORS.................................Gray and Red
SOLIDS(Volume).........................45 - 53%
THEORETICAL COVERAGE...................565 mil sq.ft/gal
DRY FILM THICKNESS.....................2.0 to 2.5 mils p/coat
DRYING TIME-AT 75 DEGREES F:
TO HANDLE..............................30 Minutes.
TO RECOAT..............................2 Hours
VEHICLE TYPE...........................Modified Alkyd
WEIGHT/GAL.............................11.5 lbs/gal
TEMPERATURE RESISTANCE.................Up to 250 degrees F
ADVANTAGES:
- Low Volatile Organic Compound Content
- Excellent Corrosion Resistance
- Excellent Foundation.
- Extremely Abrasion Resistant
- Water Reducible
- Water Clean-Up
- Low V.O.C.
USES:
- Steel
- Machinery
- Tanks
- Bridges
- Equipment
APPLICATION & REDUCTION: DC740 Ratmoore Primers can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Water. For spraying, thin up to 15% or as needed with Water.
SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer.
STEEL: Surface must be clean and free of all oil, grease and
foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day.
PRECAUTIONS: KEEP OUT OF THE REACH OF CHILDREN.
Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product. Keep From Freezing.
Top of Page
|