Download Griggs Paint Specification SoftwareGRIGGSPEC is a computer aided coatings selection program designed to recommend possible paints & coatings for a specific project. This interactive software will present questions and based on your answers, will suggest different coatingsystems for your painting project. This program is a guide only and the final recommendation should be confirmed with a salesperson. You may download this self-extracting file, create a directory called"griggs", copy the file into that directory and run the GSPEC.EXE to automatically extract all thenecessary files. To begin the program, type "griggs" at the griggs directory. If you have any questionsconcerning this software you may leave e-mail or call Bob Commisso at 888-947-4447. Click hereGSPEC.EXE to download the software now!
TT-P-95C Swimming Pool Paint PRODUCT: A chlorinated, rubber based swimming pool paint designed towithstand continuous submersion and the effects of wear and weather. Formulated per FederalSpecification TT-P-95C.DESCRIPTION: A chlorinated rubber coating formulated to meet TT-P-95C. This coating is especially designed for swimming pools, fountains, reflection ponds. lily ponds and garden ponds. It provides a tile-like finish that is easy to clean and chemical resistant. PROPERTIES: - COLORS............................Full Range
- PIGMENT...........................Fade Resistant
- GLOSS.............................Semigloss
- VEHICLE...........................Chlorinated Rubber
- DRYING TIME-AT 75 DEGREES F:
- SET-TO-TOUCH......................20 Minutes
- RECOAT TIME.......................24 Hours
- WEIGHT/GALLON.....................10.5 lbs.
- COVERAGE(theoretical)@1 mil dry...451 sq.ft/gl
- SOLIDS(Weight)....................52%
- SOLIDS(Volume)....................30.4%
ADVANTAGES: Weather ResistantHighly DurableChemical ResistantWater ResistantSelf PrimingUSES: Swimming PoolsFountainsConcretePlasterReflection BasinsAPPLICATION & REDUCTION: Griggs TT-P-95C can be applied by brush, roll or spray. For previously painted surfaces, thin 10-15% with T0045. For sandblasted surfaces, thin first coat up to 50%, then thin second coat 10-15% and apply.SURFACE PREPARATION: Surface must be clean, and free of allcontamination before application. Etch surface for best results. Surface may be damp but not wet priorto application. Consult your Griggs representative for specific surface preparation instructions. Allow7 - 10 days of dry weather before filling pool. For each day of rain, allow 2 additional days of drying.Do not apply if rain threatens. PRECAUTIONS: FLAMMABLE LIQUID. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.
 Top of Page
High-Gloss Alkyd Enamel 505 SeriesPRODUCT: A high quality full gloss alkyd enamel for use on all wood, metal or masonry surfaces. This product is extremely durable with excellent flow and leveling characteristics.DESCRIPTION: A specially formulated high gloss industrial alkyd enamel for wood, metal and masonry surfaces. Griggs High Gloss Alkyd Enamels are durable, washable, easy to apply and have excellent hide and scrub properties. PROPERTIES: - COLORS.............................Full Spectrum(All Colors).
- SOLIDS(Weight).....................67 - 75%
- SOLIDS(Volume).....................48 - 55%
- THEORETICAL COVERAGE...............700 sq.ft/gal*
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE..........................1 To 4 Hours
- TO RECOAT..........................8 To 10 Hours
- VEHICLE TYPE.......................Modified Alkyd
- WEIGHT/GAL.........................9.8 - 11.6 lbs/gal
- * Coverage @ 1 Mil Dry Film.
ADVANTAGES:Meets TT-E-489H Specifications.Excellent Hide.Extremely Durable.Excellent Flow and Leveling.Easy Application.Extremely Washable. USES:Wood.Metal.Cabinets.Masonry.Furniture.Machinery.APPLICATION & REDUCTION: Griggs High-Gloss Alkyd Enamels are formulated for brush, roll or spray application. For spraying, thin up to 15% or as needed with Synthetic Reducer. For brushing, use at packaged consistency or thin as needed with Mineral Spirits.SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of high gloss alkyd enamel. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection.
Top of Page
No-Prime EnamelPRODUCT: A lead-free , high-solids alkyd enamel for ferrous metal. NO-PRIME enamels are single component, modified alkyd coatings formulated for maximum rust prevention.DESCRIPTION: A highly rust-resistant enamel for ferrous metal. NO-PRIME enamels are formulated to have an extremely high solids content. These enamels offer excellent "wetting" of the steelin addition to excellent abrasion and weather resistance. Re-formulated for lower VOC content. PROPERTIES: - COLORS............................Full Spectrum(All Colors).
- SOLIDS(Volume)*...................63 - 67%
- THEORETICAL COVERAGE*.............885 mil sq.ft/gal
- DRY FILM THICKNESS................2.0 to 3.5 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE.........................6 To 8 Hours
- TO RECOAT.........................12 To 24 Hours
- VEHICLE TYPE......................Modified Alkyd
- WEIGHT/GAL*.......................9.9 - 11.2 lbs/gal
- TEMPERATURE RESISTANCE............Up to 300 degrees F
- *Values may vary with color.
ADVANTAGESMeets Steel Structures Painting Council (S.S.P.C.) requirements.ASTM B117 Salt Fog Test: 500+ Hours.ASTM D 522-60 Conical Mandrel Passes: 1/8 in. mandrelExcellent Corrosion ResistanceExcellent FoundationExtremely Abrasion ResistantUSES: SteelMachineryTanksRailingsEquipmentTowersAPPLICATION & REDUCTION: NO-PRIME Industrial Enamels are formulated for airless or conventional spray application. For spraying, thin up to 15% or as needed with Synthetic Reducer. For brushing, reduce up to 15% with Mineral Spirits or Synthetic Reducer.SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.
Top of Page
Ratmoore Primers 200 SeriesPRODUCT: A lead-free , high-solids alkyd primer for ferrous metal. Ratmoore Primers are single-component, modified alkyd coatings formulated for maximum rust prevention.DESCRIPTION: A highly rust-resistant primer for ferrous metal. Ratmoore primers are lead free and have an extremely high solids content. These primers offer excellent "wetting" of the steel in addition to excellent abrasion and weather resistance. Re-formulated for lower VOC content. PROPERTIES: - COLORS..............................Full Spectrum(All Colors).
- SOLIDS(Volume)*.....................57-65%
- THEORETICAL COVERAGE*...............885-1050 mil sq.ft/gal
- DRY FILM THICKNESS..................2.0 to 3.5 mils p/coat
- DRYING TIME-AT 75 DEGREES F:
- TO HANDLE...........................1 To 2 Hours
- TO RECOAT...........................10 To 12 Hours
- VEHICLE TYPE........................Modified Alkyd
- VOLATILE ORGANIC COMPOUNDS(VOC)*....276 G/L
- AFTER THINNING......................300 G/L
- WEIGHT/GAL*.........................13.70lbs/gal
- TEMPERATURE RESISTANCE..............Up to 300 degrees F
- *Values may vary with color.
ADVANTAGESMeets Steel Structures Painting Council (S.S.P.C.) requirements.ASTM B117 Salt Fog Test: 500+ Hours.ASTM D 522-60 Conical MandrelPasses: 1/8 in. mandrelExcellent Corrosion ResistanceExcellent FoundationExtremely Abrasion ResistantUSES:SteelMachineryTanksRailingsEquipmentTowersAPPLICATION & REDUCTION: Griggs Ratmoore Primers 200 Series can be applied by brush, roll or spray. For brushing and rolling, use as is or thin with Mineral Spirits. For spraying, thin up to 15% or as needed with Synthetic Reducer.SURFACE PREPARATION: Surface must be clean, dry and free of all contamination before application of primer. STEEL: Surface must be clean and free of all oil, grease and foreign material. Badly rusted or pitted steel should be cleaned by commercial sandblasting and primed the same day. PRECAUTIONS: Contents are COMBUSTIBLE. Keep away from heat and open flame. KEEP OUT OF THE REACH OF CHILDREN. Do not take internally. Avoid breathing vapor or mist. Do not use in tank or pit without proper protection. Read Material Safety Data Sheet before use of this product.
Top of Page |